|
|
Homepage  Process Flow
Surface Preparation and Pretreatment  | Prior to painting, the surface of the plastic parts are wiped with special solvents to remove oil from the surface. Then they are sanded with coarse grade emery cloth to promote good adhesion. Finally after wiping again with the solvent cleaner, the parts are placed in painting carts. |
The plastic parts are coated and I'painted using spray guns in our paint booth which is an open face water Wash type booth with positive issure system and exhaust fan.   
 
| The painted parts are put in the oven and left to dry at 60 C for 45 minutes. |
.jpg "Image") 
| All types of serigraphic printing, manual or tampon printing, are applied on painted orunpainted surfaces. |
 | Our products are controlled complience with spects specified by our customers. |
  | The painted products are tested for dry fil thickness and adhesion by thickness measurement device and cross cut devices. |
|
|
Announcement
Calender
| | |
|
| << |
September ’10 |
>> |
| Mo |
Tu |
We |
Th |
Fr |
Sa |
Su |
| | | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 | 11 | 12 |
13 | 14 | 15 | 16 | 17 | 18 | 19 |
20 | 21 | 22 | 23 | 24 | 25 | 26 |
27 | 28 | 29 | 30 | | | |
| | | | |
Visitors
| Bugün | 64 | | Dün | 89 | | Bu Hafta | 601 | | Bu ay | 400 | | Toplam | 21309 |
| | |
|
.jpg "Image")
